Gd Type Silicon Carbide Heating Element for Kilns & Furnace up to 1600c

• Customization: Available
• Certification: CCC, ISO9001, CE
• Type: Electric Resistance Heater
• Model NO.: VN-SC1600-R04
• Heating Temperature: 600-1600c
• Diameter: 8-54mm
• Length: 240-4000mm
• Transport Package: in Exporting Wooden Case
• Specification: 8-54mm
• Trademark: VINER
• Origin: Henan, China
• HS Code: 85168000
• Production Capacity: 50000PCS

Product Description

GD type Silicon Carbide Heating Element for Kilns & Furnace up to 1600

Product Description

VINER Industrial GD type Silicon Carbide Heating Element is made from high-density, high-purity Silicon Carbide, which is the most popular type of economical heating element capable of operating under hot and rigorous environments.

VINER Industrial Silicon Carbide (SiC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on

Furnace Features

Features of VINER Industrial GD type Silicon Carbide Heating Element

1. Withstands as high as 1600C (surface temperature)
2. Generates high heat output per unit surface area, approximately 5-10 times than 
the output of Nichrome wire
3. High strength and excellent shock resistance
4. Heat source is free of noise and air pollution

Product Parameters

The influence to GD type Silicon Carbide Heating Element surface in different Operating Temperature and Surface Load:

Atmosphere	Furnace Temperature(°C)	Surface Load(W/Cm2)	The Influence On The Rod
Ammonia	1290	3.8	The action on SiC produces methane and destroys the protection film of SiO2
Carbon dioxide	1450	3.1	Corrode SiC
Carbon monoxide	1370	3.8	Absorb carbon powder and influence the protection film of SiO2
Halogen	704	3.8	Corrode SiC and destroy the protection film of SiO2
Hydrogen	1290	3.1	The action on SiC produces methane and destroys the protection film of SiO2
Nitrogen	1370	3.1	The action on SiC produces insulating layer of silicon nitride
Sodium	1310	3.8	Corrode SiC
silicon dioxide	1310	3.8	Corrode SiC
Oxygen	1310	3.8	SiC oxidized
Water-vapor	1090-1370	3.1-3.6	The action on SiC produces hydrate of silicon
Hydrocarbon	1370	3.1	Absorb carbon powder resulted in Hot pollution

When you place an order of the VINER Industrial GD type Silicon Carbide Heating Element, please give following information:
OD: Outer Diameter;
HZ: Length of Hot Zone;
CZ: Length of Cold Zone;
OL: total Length
 
Order Sample of the VINER Industrial GD type Silicon Carbide Heating Element
ED (Rod) Shape: OD=54mm,HZ=1575mm,CZ=419mm OL=2413mm ,Resistance :0.9
Please Specify As: 54/1575/2413/0.90

Product Standard Size

GD type Silicon Carbide Heating Element Specifications and Resistance Range:

VINER Industrial GD type Silicon Carbide Heating Element Types:
GD( straight)\ U-shape\ W-shape\ single spiral\ double spiral\ Slot
In case of any inquiry or order, please kindly state diameter, length of hot end as well as the total length and electric resistance, thank you.
 

Manufacture & Installation

Notes for using and installing the VINER Industrial GD type Silicon Carbide Heating Element:
1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.
2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.
3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.
4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.
6. Silicon Carbide (SIC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.

Packaging & Shipping

VINER Industrial GD type Silicon Carbide Heating Element Packaging:
In Standard Exporting Wooden Case

VINER Industrial GD type Silicon Carbide Heating Element:
We could supply you the follow shipping way for your choice:
--By DHL/Fedex (Door to door, Home delivery service)
--By Air to your nearest Airport
--By Sea to your nearest Seaport
--By the sellers' shipping agent

Company Profile

VINER Industrial Specializes in SiC heating elements with ED (Rod, Straight) type, U type, W type, L type, Slot type, Single Spiral, Double Spiral, UX type and diameter 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 25mm, 30mm, 31.7mm (1.25inch), 35mm, 38.1mm (1.5 inch), 40mm, 44.4mm (1.75 inch) to 54mm (2.125 inch), 75mm (2.95 inch). Also different sizes and kinds of high temperature furnaces, such as Muffle Furnace, Vacuum Tube furnace, Vertical Tube Furnace, Rotary Tube furnace, Vacuum Crucible furnace, Vacuum Box furnace, Atmosphere Furnace, Bottom Loading furnace, and Vacuum Drying Oven, the chamber sizes could be according to customers' design.  

What is more, VINER Industrial produces and supplies high temperature Kiln Furnace Spare Parts including MoSi2/Resistance Wire heating elements, Ceramic Fiber Insulation, Alumina/Zirconia Ceramics, Silicon Carbide Ceramics, Boron Nitride (BN) Ceramics, Vacuum Flanges, Thermocouple, PID Temperature Controller, and Quartz Furnace Tube. Ps kindly inquiry us, we will try our best to serve you.

Welcome to visit manufacture line!!

Guaranteed Quality: Our SiC heating elements are warranted to be free from defects in materials or workmanship for 1 years from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost. This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.

Sound after Sales Service: We provide sound after sales service. We provide 24 hours' consultation service. We are ready to answer your consultations at any time. 

• Prompt reply within 24 hours without delay by our specialized after-sale service sector.
• Provide high temperature solutions and professionals construction services for different fields for our customers.
• Provide the most reasonable logistics for customers to save every penny.
• Production of goods are finished, thoughtful provide products and packaging photos for our customers.

FAQ

Q1. Can you accept OEM?
Yes! We can manufacture as per your request size.

Q2. Can you deliver the goods via our shipping agent?
Yes, we could help you make the delivery using your shipping agent.

Q3. Can you supply sample:
Yes, we can give you suitable suggestion about the SiC heating elements according to your detail application.

Q4. What about your After-sales service:
We promise that we can change or refund products if there are any quality problem.